NatureSolve AC - Aircraft Cleaning Solution

The Environmentally Friendly Way To Clean Aircraft Exteriors, Interiors, Food Processing Areas and Other Washable Surfaces.

• NON-HAZARDOUS
• NON-TOXIC
• NON-FLAMMABLE
• NON-CAUSTIC
• BIO-DEGRADABLE

NatureSolve-AC is not a soap, detergent or petroleum solvent. 
NatureSolve-AC is an industrial strength concentrate, formulated to remove all common soils, grease, oil, dirt, wax, gum, dye, inks, carbon, smoke and exhaust stains. NatureSolve-AC cleans metal, plastic, rubber, porcelain, concrete and wood surfaces through a biodegradable proprietary formula safely, effectively and economically.

NatureSolve-AC is safe to store in a normal way and is user
friendly-no need for special clothing or protective devices. 

NatureSolve-AC may be used in pressure washers, soak tanks, dip tanks, steam cleaners, ultra-sonic tanks, or applied by spray, cloth or mop.

Features/Benefits of NatureSolve-AC

• Liquid Concentrate
• Readily Biodegradable
• pH 9-10 in concentrated form
• Rinses film-free, leaves no residue
• Non-streaking
• Contains no Phosphates, Nitrates, Sulphates,
Sulfonates, Caustics, Terpenes, Chlorinated Solvents
or Petroleum by-products
• Less than 50 g/l Volatile Organic Compounds
(VOC’s) in dilution as tested by California South
Coast Air Quality Management District
• Meets new FSIS (Food Safety and Inspection
Service) policy changes to 9 CFR Parts 308, 318 and
381 Subpart H

• Will not react with other chemicals to create 
  hazardous conditions
  • Will not harm fabrics
  • Will enhance natural bacteria found in waste water 
  treatment systems, sewer systems, septic tanks, 
  grease traps, drain lines and clarifiers
  • Compatible with Oil/Water separators
  • May be used as a petroleum dispersant and 
  bioremediation agent on open waters
  • May be used as a scale deposit inhibitor in heating 
  and cooling systems

Safe, Cost Effective and User Friendly

NatureSolve-AC is pH balanced colloid, non-ionic surfactant concentrate that removes petroleum based soils, fats, oils and greases; safely, efficiently and cost effectively. NatureSolve-AC formulation allows for a substantially higher “load point” than other aqueous based cleaners. The “load point” is the amount of contaminant that can be solubilized in a mixed solution of cleaner and water. The higher “load point” allows for more effective cleaning.

NatureSolve AC - Testing Results

1. Scientific Material International Inc.
A: Passes Boeing D6-17487 revision M, Exterior and General Cleaners and Liquid Waxes, Polishes and Polishing Compounds.
B: Passes Douglas Aircraft Company Customer Service Document CSD#1, Revised August 2, 1988, Type 1: Material and Procedures for General Exterior Cleaning of Painted and Unpainted Surfaces.
C: Passes AMS 1526B, Cleaner for Aircraft Exterior Surfaces Water-Miscible, Pressure-Spraying Type.

2. Meets South Coast Air Quality Management District Standards
Certified as a Clean Air Solvent

Application / Dilution Ratio’s

From Outside Great Britain :-
Phone: 44 1924 490988. Fax: 44 1924 496249.